Intelligence
Explorer.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4030: fix invalid oversampling_ratio validation In ad4030_set_avg_frame_len(), the logarithm is calculated before input validation. Passing zero or negative values leads to an undefined result from ilog2(). Validate that the input is strictly positive prior to computing its logarithm.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix use-after-free on unbind ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with devm_krealloc() at runtime, so its devres entry sits after all probe-time entries of the driver. devm resources are released in reverse allocation order, which means unbind frees samples_buf before iio_device_unregister() disables the buffers and detaches the trigger pollfunc. The data ready IRQ is still enabled at that point, so ad_sd_trigger_handler() can still run and memcpy() incoming samples into the freed samples_buf. Fix this by preallocating the buffer in devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and the IRQ are set up, so it is freed only after iio_device_unregister() has drained the trigger handler via free_irq(). Size it for the worst case of all sequencer slots being active; ad_sd_validate_scan_mask() already caps the number of active channels at num_slots. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: pac1934: check ACPI label duplication A label duplication failure currently reaches the terminating-byte write. Release the ACPI result and abort before accessing the missing label; earlier labels are managed by devres. Detected by static analysis and reviewed with AI-assisted source auditing.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: stm32-adc: fix possible division by zero in processed channel In case the conversion has failed or returned zero, processing *val can lead to a division by zero. Need to check for errors, or converted value is zero, before processing the data. In case the converted value is zero, e.g. the Vrefint channel, this should be considered as invalid in all cases.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure If devm_thermal_of_zone_register() fails, probe returns without unregistering the IIO map array or disabling runtime PM. Jump to err_map to release them.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via schedule_delayed_work(); that work is cleared by a devm callback. Register the devm callback before devm_request_irq() so the devres LIFO teardown frees the IRQ first, ensuring the handler can no longer queue work by the time the workqueue is cleared. Otherwise the handler could re-arm the work and run it after the xadc structure has been freed. This issue was found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: serialize buffer teardown with mode claims Buffer-mode claims hold mlock to guarantee that the device remains in buffer mode until the claim is released. Normal buffer updates take info_exist_lock followed by mlock in iio_update_buffers(). However, iio_device_unregister() disables and deactivates all buffers without taking mlock. This can invalidate buffer state, including active_scan_mask, while a buffer-mode claim is held. Take mlock in iio_disable_all_buffers() so that unregister honors the mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering matches iio_update_buffers().

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Ensure bounce buffer used for unaligned case is zeroed. iio_push_to_buffers_with_ts_unaligned() leaks uninitialized heap memory to userspace if the data passed in is not a multiple of 8 bytes and the timestamp is enabled. Specify __GFP_ZERO for the devm_krealloc() to ensure any extra space is cleared.

In the Linux kernel, the following vulnerability has been resolved: iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. adf4377_clk_register() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter is uninitialized, and thus may cause a crash. Similarly, adf4377_clk_register() fills in only parent_data.fw_name, leaving other members of the clk_parent_data structure uninitialized. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16136: fix unprotected debugfs reads The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead.

In the Linux kernel, the following vulnerability has been resolved: iio: health: max30102: fix NULL dereference in interrupt handler The interrupt is requested in max30102_probe() and stays enabled for the lifetime of the device, but indio_dev->active_scan_mask is only valid while a buffer is enabled. When an interrupt arrives while no buffer is enabled, the handler dereferences the NULL active_scan_mask: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __bitmap_weight+0x64/0x98 (P) max30102_interrupt_handler+0x48/0x160 [max30102] Call max30102_fifo_count() at the top of the handler and return early unless it reports a FIFO sample is ready. Because FIFO_RDY is the only interrupt source enabled in max30102_chip_init(), an invocation of max30102_interrupt_handler() without the FIFO_RDY interrupt status bit set carries no data to read and can return before touching active_scan_mask. A negative return from max30102_fifo_count() indicates a failed interrupt status read and is treated the same way.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16400: fix unprotected debugfs reads adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16480: fix unprotected debugfs reads The firmware_revision and firmware_date file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead.

In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap020a00f: drain irq_work after free_irq The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review.

In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails.

In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup The sampling frequency tables store each frequency as an integer part and a fractional part in micro units. num_sampling_freq_avail is initialized to the number of flattened integer elements because read_avail() returns the table as a flat array. bmp280_write_sampling_frequency(), however, indexes the same table as a two-dimensional array and uses num_sampling_freq_avail as the number of rows. Convert the flattened element count back to the number of rows before iterating over the table.

In the Linux kernel, the following vulnerability has been resolved: iio: pressure: rohm-bm1390: Return error when read fails The data reading function ignores the cached error value, and unconditionally returns 0. Return cached 'ret' -value after stopping the measurement so user knows if read failed and data is garbage.

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: aw96103: validate firmware data length The firmware parser reads a length from the binary header and then uses it to walk six-byte register/value entries. A truncated firmware image can make the parser read beyond the copied firmware buffer. A value smaller than the four-byte count field also underflows, producing a very large length. Read the little-endian field with get_unaligned_le32(), as previously proposed by David Lechner. Validate the header size, reject an underflowed length, ensure the resulting payload is contained in the firmware image, and require it to contain whole register/value entries.

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mirroring the teardown order already used in lidar_remove().

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: cancel reenable_work before freeing trigger iio_trigger_notify_done_atomic() defers ->reenable() into trig->reenable_work on the system workqueue, and the worker dereferences the owning trigger through container_of(). Nothing cancels this work before iio_trig_release() frees the trigger, so a worker armed by the last in-flight IRQ can outlive the free and touch freed memory. Cancel it at the top of iio_trig_release(), which every free path reaches through the device core's final put_device(). Found by an in-house static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: perf: Require kernel access for text poke events Perf events with exclude_kernel=1 can be opened without kernel perf access. However, exclude_kernel does not suppress text-poke sideband records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL and contains a raw kernel instruction address. An unprivileged task can therefore open and mmap a task-local software event with text_poke=1. Both opening a count-only tracepoint event and configuring UDP GRO for ESP-in-UDP cause updates to inline static calls; the observer receives the relocated addresses of the modified instructions. For a known kernel image, any such address reveals the runtime kernel text base despite KASLR. Call perf_allow_kernel() whenever attr.text_poke is set, regardless of exclude_kernel. Events that neither monitor kernel execution nor request text-poke records retain their existing permissions.