Intelligence
Explorer.

In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip_append_data, rather than to IP_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of IPv4 header). Device MTU allows it (it's only one byte bigger than IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward. The Fixes tag points at the first commit where I could reproduce the overflow with IPv4 and IP_PMTUDISC_PROBE.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtime PM reference is dropped asynchronously, allowing the device to autosuspend while stale page faults belonging to the now-dead VM are still queued. When the page-fault worker later tries to ack one of these, it calls into guc_ct_send_locked() on an already-suspended device, tripping:   Assertion `!xe_pm_runtime_suspended(xe)` failed!   WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe] A live VM/exec queue always holds a PM reference while it has outstanding work, so if the device is suspended at ack time, the owning context is already gone and the fault is stale. Take a runtime PM reference across the entire pagefault queue worker to safely deliver acks for torn-down VMs. v3: - Move PM ref to the generic xe_pagefault_queue_work using guard(xe_pm_runtime)(xe) instead of tracking it in the GuC backend(Matt Brost). v2: - Hold PM ref across the entire batch (begin/end) instead of per-ack. This prevents the device from autosuspending mid-batch, which would leave write_only acks written but the end flush skipped, and skip counter++, desyncing the cadence check.(Himal) - Add a comment explaining stale faults.(Himal) (cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455) [Rodrigo: Added xe_device struct for compatibility while cherry-picking]

In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu] [ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu] [ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu] [ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu] [ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu] [ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu] [ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu] [ 1576.771460] process_one_work+0x23e/0x6f0 [ 1576.771491] worker_thread+0x1c4/0x380 [ 1576.771506] kthread+0x10c/0x150 [ 1576.771512] ? __pfx_worker_thread+0x10/0x10 [ 1576.771518] ? __pfx_kthread+0x10/0x10 [ 1576.771530] ret_from_fork+0x314/0x390 [ 1576.771537] ? __pfx_kthread+0x10/0x10 [ 1576.771546] ret_from_fork_asm+0x1a/0x30 (cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08)

In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_on_exec() before the exec_update_lock is taken, but after the FD table has been copied if necessary. I have looked through all the calls between the old and new position of the do_close_on_exec() call; there seems to be no file descriptor table access in between.

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed.

Dell PowerScale InsightIQ, versions 5.2.0 through 6.3.0, contains an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service.

Dell PowerScale InsightIQ, versions 5.2.0 through 6.3.0, contains an Overly Restrictive Account Lockout Mechanism vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service.

Cloud Commander (cloudcmd) versions 19.20.2 through 19.21.1 contains a path traversal vulnerability in the GET /api/v1/pack endpoint where the onGET handler at server/rest/index.js:130 calls the unguarded root() function instead of the root.resolve() validation wrapper used elsewhere. Attackers can send percent-encoded directory traversal sequences in the pack request path to read arbitrary files outside the configured --root directory, such as /etc/passwd or SSH private keys, which are archived and streamed back as a downloadable tar.gz file.

ONLYOFFICE DocumentServer before 10.0.0 contains an unauthenticated server-side request forgery vulnerability in the /downloadfile/:docid endpoint that allows remote attackers to bypass the private-IP request-filtering-agent by exploiting the isInJwtToken flag when JWT verification is disabled in the default configuration. Attackers can submit a crafted request body containing an internal or loopback URL, which is treated as a DIRECT request skipping private-address filtering, causing the server to fetch and proxy back arbitrary private-network and cloud metadata content.

SQL Injection (CWE-89) in the SOAP GetUser method of the /preapproval.asmx endpoint in Channel Software WebAlliance eCommerce [VERSION — missing] allows an unauthenticated remote attacker to read, write, and potentially execute commands on the backend Microsoft SQL Server via a crafted sUserID parameter value containing a single quote and stacked SQL query.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Crocoblock JetEngine jet-engine allows DOM-Based XSS.This issue affects JetEngine: from n/a through 3.8.16.

7-Zip before 26.03 contains an uninitialized memory disclosure vulnerability in the SquashFS v4 archive handler (SquashfsHandler.cpp) that allows attackers to leak heap memory by crafting a malicious archive where the superblock’s no_ids field is set so that the final metadata block’s expected size is miscomputed and bypasses the size validation check. By listing or extracting the crafted archive, attackers can cause the application to return uninitialized heap memory as the kpidUserId and kpidGroupId properties, exposing potentially sensitive process memory contents to the user.

Dell Unisphere for PowerMax vApp, version(s) 9.2.4.x, contain(s) an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.

Dell Unisphere for PowerMax vApp, version(s) 9.2.4.x, contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.

Dell Unisphere for PowerMax vApp, version(s) 9.2.4.x, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.

Deserialization of Untrusted Data vulnerability in WP SYNTEX Polylang polylang allows Object Injection.This issue affects Polylang: from n/a through 3.8.9.

Radar before 1.12.2 contains a missing authorization vulnerability in the handleLocalTerminal WebSocket endpoint (/api/local-terminal) that allows authenticated or unauthenticated attackers to spawn a privileged shell by relying only on a runtime-mode check instead of role-based access control. Attackers can connect to the endpoint to execute /bin/bash -l on the Radar host with Radar's own kubeconfig and process credentials injected into the shell environment, achieving remote code execution with Radar's privileges even when the --disable-local-terminal flag is set.

Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in TR7 Cyber ​​Defense Inc. TR7 ASP on virtual appliance and TR7 Cyber ​​Defense Inc. TR7 ASP on physical appliance allows OS Command Injection. This issue affects TR7 ASP: from 1.0.40.236 before 1.0.1554.2331; TR7 ASP: from 1.6.42.239 before 1.6.1554.2331.

Missing authentication for critical function vulnerability in TR7 Cyber ​​Defense Inc. TR7 ASP on virtual appliance and TR7 Cyber ​​Defense Inc. TR7 ASP on physical appliance allows OS Command Injection. This issue affects TR7 ASP: from 1.0.40.236 before 1.0.1554.2331; TR7 ASP: from 1.6.42.239 before 1.6.1554.2331.

A flaw was found in the clevis PKCS#11 pin. The clevis-pkcs11-afunix-socket-unlock daemon logs LUKS disk encryption passphrases in plaintext to a log file. The log file is created without restrictive permissions, making it world-readable under the default process umask. A local attacker can read the log file to obtain the LUKS passphrase.

Deserialization of Untrusted Data vulnerability in itthinx Affiliates affiliates allows Object Injection.This issue affects Affiliates: from n/a through 7.0.1.