Intelligence
Explorer.

In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior.

In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again.

In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots LOLLM noticed that the inode btree root formatting methods copy too many bytes -- there's only one set of keys in node blocks, not two. This causes memory corruption of whatever's beyond the buffers.

In the Linux kernel, the following vulnerability has been resolved: xfs: don't let hidden_space go negative in xfs_metafile_resv_init LOLLM points out that if the amount of fdblocks that we can reserve for a metadata btree file goes below the space already used by that file, then the hidden_space subtraction can underflow, causing xfs_dec_fdblocks to subtract a huge amount of space. We never want the target to be less than the used sapce, so fix the logic that adjusts dblocks_avail downwards. Also fix an error in the adjacent comment.

In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away.

In the Linux kernel, the following vulnerability has been resolved: xfs: drop dquot flush lock when we can't find a buffer to flush LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock if it can't grab the buffer associated with the dquot. Since there's no buffer, nobody else is going to drop the dqflock, so we need to do it ourselves.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up processing both again but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels or run NAT and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where we need to process both clones without modifications in the same zone. So, let's just reset the entry in case for some reason we got an skb with a shared one. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. Unlike openvswitch module, act_ct allows for NAT without commit. Changing that would be a uAPI break. So, act_ct needs to reset on NAT regardless of the commit flag to avoid reallocation of the extension space. This, however, doesn't really change the picture for sensible networking cases as there should be no need to run the same packet twice (before and after the clone) through conntrack without packet header or zone changes and without commit. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already.

In the Linux kernel, the following vulnerability has been resolved: smb/server: cancel async requests when closing connection An async request may still be waiting when a connection is closed. This can stop the connection from closing. Cancel active async requests before waiting for them to finish.

In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case.

In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: fix runtime PM reference leaks Use pm_runtime_resume_and_get() in iris_enable_power_domains() to avoid leaking a runtime PM usage count on failure. Also ensure pm_runtime_put_sync() is always called in iris_disable_power_domains(), even when iris_opp_set_rate() fails, so runtime PM references remain balanced.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Disable device buffer exporting Device buffers are never intended to be exported. Disable exporting support explicitly.

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Use parent device for devres in altr_portb_setup() Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup() to the actual parent device (device->edac->dev) instead of the embedded struct device inside the copied per-port altr_edac_device_dev. This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and devres_release_group() all referring to the same long-lived device so the group and the resources allocated inside it are torn down together.

In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions") incorrectly removed.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system.

A security vulnerability has been detected in WongKinYiu yolov9 0.1. This vulnerability affects the function DetectMultiBackend.__init__ of the file models/common.py of the component ONNX Metadata Handler. The manipulation of the argument names/stride leads to code injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in kishan0725 Hospital Management System up to 777fda46b77a820977a5ba616283dbfbc40bf7e1. This affects the function mysqli_query of the file admin-panel.php of the component Appointment Cancellation Handler. Executing a manipulation of the argument ID can lead to sql injection. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A security flaw has been discovered in dyad-sh dyad up to 1.16.0. Affected by this issue is some unknown functionality of the component OAuth Callback Handler. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. Upgrading to version 1.17.0-beta.1 can resolve this issue. The patch is named 39fbae87b38573616a1a3b152cdb292787bb1109. It is advisable to upgrade the affected component.

@fastify/jwt is a JWT utility plugin for Fastify. In versions prior to 10.2.5, the top-level sign and verify methods replace the globally configured defaults with the per-call options instead of merging them, so passing any per-call option silently drops every global default that the call does not restate, including temporal protections such as token expiration and maximum accepted token age. A token signed this way carries no expiration claim and never expires, and verification stops enforcing a configured maximum age, so stale or never-expiring tokens are accepted. The route-level decorators for signing and verifying already merge options and are not affected. The issue is fixed in @fastify/jwt 10.2.5, and users should upgrade to 10.2.5 or later.

A vulnerability was identified in AUTOMATIC1111 stable-diffusion-webui up to 1.10.1. Affected by this vulnerability is the function read_metadata_from_safetensors of the file modules/sd_models.py of the component Extra-Networks Card Builder. Such manipulation of the argument __metadata__.sshs_model_hash leads to cross site scripting. The attack can be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

libstrophe through 0.14.0 contains a stack-based buffer overflow vulnerability in SCRAM_Hi that allows malicious XMPP servers to overflow a 128-byte stack buffer by sending an oversized SCRAM salt. Attackers can send a server-first-message whose s= attribute decodes to more than 124 bytes, aborting the client or overwriting stack memory in NDEBUG builds.